Once a successful code is entered, verify that TV power, mute, and the volume + and – buttons function properly. Press and hold SETUP until the LED turns GREEN, 2. Element TV Remote Codes for XR11 Remote GE universal remotes RCA universal remotes Philips universal remotes Sony universal remotes AT&T U-verse remotes DirecTV remote controls Spectrum remote controls Dish Network remotes TiVo remote controls Jumbo remote controls Vizio universal remotes OneForAll remote controls. If you are pairing with an RF adapter, refer to the RF adapter instructions to complete pairing
\r\n4. Consult the dealer or an experienced remote control, It is strongly recommended that the TV be plugged, The user is cautioned that changes and modifications made, to this equipment without the approval of the manufacturer.

How To Program Comcast’s Xfinity XR11 Voice Remote. This equipment generates, uses, and can radiate radio frequency energy and, if not used, in accordance with the instructions, may cause harmful, There is no guarantee that interference will not occur in a, particular installation. Be sure to point the remote at your TV during setup, Be sure to point the remote at your Audio Device during setup. 1 – Turn ON the TV you will be using with the XR11 remote. See it. If a PIN number appears on the TV screen, enter that number using the remote numeric keys.

Voice command – When the remote is paired to a receiver, you can search TV listings and On Demand, find a recorded show, change channels, set a recording, and more, with just your voice. Follow the steps below to pair your remote with the Aim Anywhere device: Step 1: Press and hold the "Setup" button for 3 seconds, until the status LED changes from red to green. Share or Print This Article. exceeding the FCC radio frequency exposure limit. different from that which the receiver is connected. Sign in, Looking for Business service? Full streaming experience: On Demand, voice remote, streaming apps, music and more! More Buying Choices $4.46 (7 used & new offers) Test the remote to confirm that it controls your TV Power and Volume functions as expected. 4.1 out of 5 stars 200. ". Here is a list of TV codes that will work with the XR11 Cox or Xfinity remote. Here’s a step-by-step guide to how to do it.

Panasonic TV Remote Codes for XR11 Remote Press the "TV Power"/"All Power" button on the remote.

Xfinity XR11 Voice Remote.

5 – If the 5 digit code you entered did not work, keep trying the numbers in the TV brand code list until you find one that programs the remote to the TV. DirecTV remote controls If you would like to use your remote to control multiple Xfinity set-top boxes simultaneously, you can remove Aim Anywhere pairing by following the steps below: Step 1: Press and hold the "Setup" button on the remote until the status LED changes from red to green. Test the remote to confirm that it controls your Audio Device Volume functions as expected. 7 – After your TV turns OFF press SETUP. If the status LED blinks green twice, you have successfully removed Aim Anywhere control. Step 3: Follow the on-screen instructions to enter the 3-digit code that appears. Unpair and re-pair the remote and receiver. Your XFINITY Remote is already programmed to control your set-top box.

Discover content by channel, program name, or key words by simply pushing a button and speaking. Step 4: Press the "CH ^" button repeatedly until your device turns off. had to replace defective box with another.